Silicone Release Film
A functional film that forms a release layer by coating silicone on the surface of the base film, providing stable release performance.
Optimal release performance is achieved through release design tailored to the application and adhesive characteristics.
Specification Examples
| Base Material | PET, PP, PE, various plastic films |
|---|---|
| Release Force | Lineup from light release to heavy release, with design customization according to application |
| Thickness Range | 12μm〜188μm |
| Processing Form | Roll |
Representative Product List
| Series | Grade | Peel strength [31B method] (mN/50mm) | Residual adhesion rate (%) |
|---|---|---|---|
| 1 | C01 | 55 | 90 |
| C1 | 110 | 90 | |
| C1K | 80 | 95 | |
| 2 | CA0K | 70 | 95 |
| CA1K | 130 | 95 | |
| 3 | CB3 | 250 | 95 |
| CB4 | 490 | 95 | |
| 4 | C3 | 1,040 | 90 |
| 5 | BK0A | 50 | 95 |
| BK1 | 110 | 95 | |
| BK3 | 190 | 95 | |
| BK5 | 1,000 | 95 |
[Release Force Measurement Method]
Nitto No.31B Tape 0.3m/min 180° Peel
Nitto No.502 Tape 0.3m/min 180° Peel
[Residual Adhesion Rate Measurement Method]
Nitto No.31B Tape 0.3m/min 180° Peel
(Adhesive force to stainless steel plate after separator lamination) ÷ (Adhesive force to stainless steel plate of blank) × 100
* Values in the table are representative values and are not guaranteed.
Technical Support & Customization
We design optimal release specifications according to your adhesive type, processing conditions, and storage environment.
Please consult us for prototype evaluation and small lot production.